4 Tips to Tuneup Your Garage Door this Spring – Part 2

Sure! Here's a rewritten and improved version of the provided content in English, with added details to reach over 500 characters while keeping it natural and engaging: ---

4 Tips to Tuneup Your Garage Door this Spring – Part 2

In Part 1 of our guide on how to tune up your garage door this spring, we covered the importance of maintaining smooth and safe operation, as well as how to inspect both your door and opener for potential issues. Now, let’s take a closer look at three more essential steps to ensure your garage door is ready for the summer season.

1. Check the Door’s Safety Systems

Most modern garage doors come equipped with two safety features. One automatically reverses the door if it detects an obstruction while closing. The other uses photoelectric sensors that stop and reverse the door if something interrupts the signal between them. To test the safety sensors, place an empty cardboard box on the driveway just outside the open door. Stand on the opposite side and use a stick to push the box into the path of the sensors. When you do, the door should stop and reverse immediately. For the impact sensor, place a short 2x4 on the floor where the door normally touches when closed. Then, close the door using the remote. It should stop and reverse upon hitting the wood.

2. Inspect the Door’s Seals

Your garage door has weatherstripping along the bottom, between panels, and around the frame. These seals help keep your garage insulated and prevent drafts. Make sure they are intact and not damaged or worn out.

3. Lubricate the Moving Parts

Proper lubrication is key to keeping your garage door running smoothly. Use a petroleum-based lubricant on metal-to-metal parts like hinges and rollers (but never apply it directly to the roller tracks). For weatherstripping and other rubber components, a silicone-based lubricant is best. A little maintenance now can save you from costly repairs later. If you notice anything unusual or need assistance, don’t hesitate to contact us at 905-665-8668. We’re here to help!



--- This version improves clarity, adds a bit more detail, and maintains a friendly, informative tone suitable for a blog post.

IKURA Feeder Clamp

The company will take "quality first, reputation first" as its eternal theme, adhere to the development of science and technology, continuously develop new products, and resolutely maintain a good after-sales service system. The company's service tenet: quality first, customer first. We are willing to work together with our customers to create a grand blueprint.

IKURA Centre Shaft Clamp,Automatic Bar Feeder Clamps,Electrical Bar Clamps,Plastic Parts Centre

Shenzhen Boyuan Electromechanical Equipment Co., Ltd. , https://www.boyuanmach.com