**Engine Specifications:**
The engine is an air-cooled, 4-stroke, OHV (Overhead Valve), single-cylinder unit designed for efficiency and reliability. It features a bore of 41.8 mm and a stroke of 36 mm, resulting in a displacement of 42 cm³ (2.99 cu in). The compression ratio is set at 8.0:1, providing a balanced performance for various applications. This engine delivers a power output of 1.6 kW (2.1 HP) at 7,000 RPM and produces a torque of 2.7 Nm (2.0 lb-ft) at 4,500 RPM.
The PTO (Power Take-Off) shaft rotates counterclockwise when viewed from the PTO side, making it suitable for specific machinery setups. The ignition system uses a transistorized magneto, ensuring consistent spark and reliable starting. The recoil starter allows for easy manual starting, while the float-type carburetor ensures proper fuel delivery.
Lubrication is handled through a forced splash system, which helps maintain engine longevity. A centrifugal mechanical governor regulates speed effectively, and a semi-dry air cleaner keeps the intake system clean and efficient. The oil capacity is 0.25 liters (0.26 US quarts, 0.22 imperial quarts), and the fuel tank holds 0.77 liters (0.81 US quarts).
The engine measures 225 mm (8.9 in) in length, 274 mm (10.8 in) in width, and 353 mm (13.9 in) in height, with a total weight of 5.5 kg (12.1 lbs), making it compact and lightweight for easy installation.
**Package Includes (Kit without Motor):**
This kit includes all necessary components to integrate the engine into a bicycle or similar vehicle. It contains:
1. A plate with clutch bell and gear already attached to the bicycle frame
2. A 415 chain for power transmission
3. A 44T sprocket for gear engagement
4. A sprocket installation kit for easy setup
5. A throttle grip for control
6. A throttle cable to connect the grip to the carburetor
7. A kill switch for emergency shutdown
Whether you're building a custom bike or upgrading an existing one, this kit provides a complete and functional solution with all essential parts included.
Wear resistant ceramic series, ceramic rubber sheet three-in-one composite liner combines the advantages of ceramic's high hardness and rubber's high cushioning, with wear resistant and impact resistant performance, which can solve the problem of anti-abrasion of the equipment in the process of conveying bulky materials and effectively reduce the environmental noise.
Roller covered is an important part of the belt conveyor transportation system, after covered the roller can effectively improve the operating conditions of the conveyor system, to protect the metal roller from wear and tear, rhombic pattern, ceramic rubber plate coating surface, can increase the friction on the surface of the rubber plate, to prevent the sliding friction between the roller and the belt to reduce the belt slipping, to reduce the roller surface of the material adhesion, so as to reduce the belt deflection and abrasion, so that the roller synchronized with the belt to ensure efficient operation of the belt.
pulley lagging,rubber sheet,wear resistant,ceramic rubber sheet,Three-in-one impact resistant ceramic composite liner
Hebi Shuanglian Trading Co., Ltd. , https://www.slwearrubber.com