Â
 Applicable Industries:
The Salt Spray Tester is designed to evaluate the corrosion resistance of materials after surface treatments like painting, coating, electroplating, anodizing, and greasing. It's used across various industries including automotive, aerospace, electronics, and manufacturing to ensure the durability and quality of products against environmental conditions.
Â
Specifications:
1. The Salt Spray Test Machine is constructed with transparent materials, allowing operators to observe the tested samples and the spraying process in real-time.
2. A waterproof structure between the chamber cover and body ensures no salt spray leakage, maintaining a controlled environment for accurate testing.
3. The machine features a tower spraying system equipped with a salt solution filter and non-crystalline nozzle, ensuring even distribution of the salt mist and adjustable settlement rate.
4. The control system includes a high-precision P.I.D. temperature controller with an error margin of ±0.1°C, providing precise temperature regulation during testing.
| Model | XB-OTS-60 | XB-OTS-90 | XB-OTS-120 | XB-OTS-160 | XB-OTS-200 |
| Inner size (cm) | 60x45x40 | 90x60x50 | 120x80x50 | 160x100x50 | 200x120x60 |
| External size (cm) | 107x60x118 | 141x88x128 | 190x110x140 | 230x120x140 | 270x150x150 |
| Inside temp |
Brine test method (NSS ACSS) 35°C±1°C / Corrosion resistance test method (CASS) 50°C±1°C |
||||
| Brine temp | 35°C±1°C 50°C±1°C | ||||
| Test chamber volume | Â Â Â 108L | 270L | 480L | 800L | 1440L |
| Brine chamber volume | Â Â Â 15L | 25L | 40L | 40L | 40L |
| Compressed air pressure | 1.00±0.01kgf/cm2 | ||||
| Spray volume | 1.0~2.0ml/80cm2/h (Collect at least 16 hours, the average) | ||||
| Test room relative humidity | 85%RH or more | ||||
| PH | 6.5~7.2 3.0~3.2 | ||||
| Spray method | Programmable spray (including the continuous spray, interrupted spray) | ||||
| Power | AC220V1Φ10A | AC220V1Φ15A | AC220V1Φ20A | AC220V1Φ20A | AC220V1Φ30A |
Features:
*Automatic/manual water system automatically adds water when the level is low, ensuring uninterrupted testing. Low water level warning enhances safety during operation.
Â
*Precision glass nozzle (PYREX) made from special glass ensures even mist distribution and natural fall on the specimen. It can operate continuously for 4000 hours without clogging due to crystallized salt.
Â
*Double over-temperature protection with warning display and automatic heater power cut-off ensures safe operation and prevents overheating.
Â
*Digital display inlet temperature controller with PID control offers an accuracy of ±0.1°C, ensuring precise temperature management.
Â
*Direct steam heating system provides fast heating and reduces standby time. Heating tubes are made of high-corrosion-resistant titanium tubing for long-lasting performance.
Â
*The spray tower is equipped with a conical dispersion design that allows for directional fog and regulates the amount of fog uniformly for consistent testing results.
Â
*The saturated air barrel uses Henry’s law to provide heated humidification, ensuring the required humidity in the laboratory. Made of SUS #304 stainless steel, it has good insulation and visual connectivity for easy monitoring and cleaning.
Â
*An automatic defogging device enables clear visibility of the specimen inside the test chamber, enhancing the overall testing experience.
Â
*Fog sealing sink with a water seal prevents fog leakage, maintaining a controlled and safe environment during testing.
Â
*Laboratory sealing cover made from imported Taiwan PVC board with a pneumatic cylinder for automatic lifting, making it easy to operate and safe to use.
Â
*Imported timer with digital display offers accurate timekeeping, allowing segmented setting of any required test time ranging from 0.01 seconds to 9999 hours.
Â
*Reagent supplement bottles are hidden with a water level viewing window, making them easy to clean and resistant to breakage.
Â
*Laboratory basket rack using plane indexing rack allows for arbitrary adjustment of the angle, ensuring four-directional fog distribution with consistent fog direction.
Corresponding Standard:
GB11158 Â Â Â Â Â GB10589-89 Â Â Â Â Â Â Â GB10592-89 Â Â Â Â Â Â GB/T10586-89 Â Â Â Â Â GB/T2423.22-2001 Â Â Â
GB/T2423.1-2001 Â Â Â GB/T2423.2-2001 Â Â Â Â GB/T2423.3-93 Â Â Â Â GB/T2423.4-93 Â Â Â Â ASTM D1735Â
IEC60068-2-1.1990 Â Â Â IEC60068-2-2.1974 Â Â Â Â IEC 68-2-30Â Â Â IEC68-2-03Â Â EIA - 364-31C Â EIA - 364-59
Product View ofsalt spray test chamber:
Packing & Shipping:
Packaging Details: Strong wooden case for salt spray test chamber
Delivery Detail: 20 days after getting the payment or Spot
Â
Our Services:
We are here to help you. Services available:
Replacement manuals
- Consumables and replacement parts
- On-site maintenance and repair
- Warranty support
- Over-the-phone service support and advice
If you have an OTS chamber, we will do our best to help you in whatever way we can.
Manuals: PDF files of manuals for current models are available free. Please contact us to request a copy. Older and printed copies at additional charge.
- Service repair: We prefer you contact us directly at the factory with any problems you may be experiencing. We help diagnose the problem, arrange for any needed parts, and schedule a technician to do the repairs. Rarely can a local contractor get all that done for you as quickly as we can. We also guarantee the work.
Â
Our Company
OTS (Overall Testing System)
  Was established in 1978, with 35 years' history
    With 30,000 square meter salable production base and 120 employees
    Is one of the leading companies solely dedicated to manufacture of
     Environmental Simulation Test Chambers, Physical Testing Equipment .   Â
Architectural Window Film,Decorative Window Film,Security Window Film,Energy Efficient Film,Sun Glare Minimization
Jiangsu Yaosheng New Materials Co.,Ltd , https://www.yscarfilm.com