How to check and adjust domestic gasoline pump working condition?

Unscrew the carburetor into the pipe joints, pick up the petrol pump with your fingers to the force arm position, slowly turn the engine crankshaft, so that the hand arm to and fro to walk a work schedule. If the trip is small, the gasoline pump can be moved to the maximum working stroke (camshaft eccentric eccentric maximum Department at the top of the rocker arm), and then force the hook arm, you should feel a little reserve trip.
If there is no itinerary, the gasket on the joint surface between the pump body and the engine is too thin. If the stroke is too large, it indicates that the gasket is too thick or the inner arm is worn and should be adjusted or repaired.
If the rocker is working properly, you can remove the inlet and outlet of the gasoline pump, plug the oil inlet with your fingers, pull the hand crank and your fingers should feel suction. If the suction is stable after pulling, maintain 5S Above, you may determine that the valve is good; pull the hand crank and then block the oil outlet, according to the feeling of pressure on the inlet valve to determine. If the valve is not tight, it should be demolished to replace the oil valve.
When the fuel pump outlet out of power, you should check the fuel pump into the gas pipeline and gasoline filter situation. When the pipeline or filter is clogged or the pipeline leaks, it will also result in the problem of weak or no oil.
If the gasoline pump test function is normal, you do not have to disassemble and check, only do a good job of cleaning.

Based on the low labor cost and reasonable stainless steel cost, Helper help to offer clients internal transport devices with best price. These machines and device include standard material truck, smoking trolley, lifter, conveyer belts, spiral feeding machine, hydraulic lifter etc. The internal transport device is used in filling and forming workshop, tumbling and seasoning workshop, smoking and cooking room etc.

internal transport device new

Helper has a professional team to design and produce sausage clips. They have rich experience and understand all the key points for produce good quality clips. From the raw material purchasing to mould designing, from the QC in production to post-treatment, they pay attention to all these details that lead to the good quality of Helper`s clip series. Our clips products include U shape clips, Great wall shape clips, and aluminum wire (for aluminum wire clipper).

consumables overview

Peripheral Devices and Consumables

U Shape Sausage Clip,Clips On Strip,Bag Packaging Clips,Screw Material Conveyor

Shijiazhuang Helper Food Machinery Co., Ltd. , https://www.ihelpergroup.com