National Development and Reform Commission predicts that the petrochemical industry will develop faster this year

At the National Economic Development and Reform Commission’s press conference on the economic situation in 2006 held on January 29, Zhu Hongren, deputy director of the Economic Operation Bureau of the National Development and Reform Commission, said in response to a question from the China Chemical News reporter that the petroleum and chemical industries have remained very good last year. In addition to the loss in the refining sector, the mid-stream and downstream companies in the petroleum and chemical industries have achieved better results. In 2007, the petroleum and chemical industries will have a relatively rapid growth in balance.

Zhu Hongren said that the petroleum and chemical industry is the country's economic pillar and the basic industry of the national economy. In 2006, the economic index of China's petroleum and chemical industries grew rapidly, with a profit of 443.5 billion yuan, an increase of 17.9% over the previous year. At the end of 2006, in accordance with its commitment when joining the World Trade Organization, China opened its refined oil wholesale market to foreign capital, which signified that China’s petroleum and petrochemical sector is fully open to foreign investment. China's petroleum and petrochemical companies are facing a full range of competition from home and abroad. The world's top 500 large-scale oil and petrochemical companies have almost all invested in factories or sites in China, and have fully entered all areas of China's upstream, downstream, and mid-stream industries in addition to wholesale.

According to data provided by the National Development and Reform Commission, last year's industrial production maintained a steady and rapid growth, and the industrial added value of above-scale industries increased by 16.6% year-on-year. The major industrial industries have realized an overall increase in profits. The newly added profits were too concentrated in the upstream industry. The newly added profits of coal, petrochemicals, metallurgy, non-ferrous metals, and building materials accounted for 51.1% of all new profits, a decrease of 16 percentage points year-on-year. The profitability of industrial enterprises has been enhanced. The profit rate of sales revenue was 6.09%, which was a year-on-year increase of 0.27 percentage points.

   Stone Coated Roof Tile Production Line made from natural sand, with advanced high-pressure technology to make traditional roof tile rendering 3D stereo effect.

   Unique pleated design groove, so that the roof tiles to each other more tightly grip more firmly, then water and better performance.

It has a metal plate performance, easy cutting and processing, single tile large area and light weight. Steel tile unique convex design so that each piece of tile steel are closely linked to each other, by means of its unique levels nails embedded system, firmly fixed in the roof. 


Technical parameters:

1.Auto bottom gule spraying section

l  Appearance size:4000*1000*2000 mm

l  Driving section:3KW Excitation motor or frequency speed regulation (as requirements )

l  Automatic pressure spray tank:1set  capability:200kg   Range:0.6~1Mpa

l  Automatic glue machine motor: Servo motor, Power:750w, plc

l  Automatic spray gun:4 set(spare parts)

l  Dust collecting fan: 1set    power:200w

l  Damp proof lamp:1pc      power:100w

l  Conveying device:Chain reciprocating

l  Air compressor:1set   power:7.5kw

l  Dust control of axial flow fan:1set  power: 200w

l  Agitator: 1set   power:1.5kw   


2.Auto stone coated section

l  Appearance size:3500×1000×1500mm
l  Framework: Steel welding
l  Conveying device:Chain reciprocating
l  Automatic sand hopper: 1set  capability:200kg
l  Bucket lift:1 set

 Manual sandblast gun:4sets


3.The first time drying section

l  Appearance size:25000×1000×1200 mm
l  Framework: Steel welding
l  Frame type thermal insulation wall: 1.2mm cold steel with Rock wool
l  Automatic temperature controller:4set  Range:0°~160°
l  Infrared heating tube: 30pcs   Power:30kw
l  Conveying device:Chain reciprocating
l  Air cooling device:1 set  Power:200w


4,Auto face glue spraying section
l  Appearance size:3000×1000×2000 mm
l  Framework: Steel welding
l  Damp proof lamp:1pc        Power:100w
l  Automatic pressure spray tank:1set  capability:200kg   Range:0.6~1Mpa
l  Conveying device:Chain reciprocating
l  Automatic spray gun:4 set(spare parts)
l  Manual patch glue gun:4 set
l  Dust control of axial flow fan:1set  power: 200w
l  Automatic glue machine motor: Servo motor, Power:750w


5.The second time drying section
l  Appearance size:30000×1000×1200 mm
l  Framework: Steel welding
l  Frame type thermal insulation wall: 1.2mm cold steel with Rock wool
l  Automatic temperature controller:4set  Range:0°~160°
l  Infrared heating tube: 30pcs   Power:30kw
l  Conveying device:Chain reciprocating
l  Air cooling device:1 set  Power:200w


Pictures of machine:
Stone coated production line


Stone coated production line

Stone coated production line

Stone coated production line

Stone coated production line

Stone coated production line

Stone coated production line


Training and Installation :
1. We offer installation service local in paid, reasonable charge. 
2. QT test is welcome and professional.
3. manual and using guide is optional if no visiting and no installation. 

Certification and after service:

1. Match the technology standard, ISO producing certification 
2. CE certification 
3. 12 months warranty since the delivery. Board. 



Our advantages:

1. Short delivery period. 
2. Effective communication 
3. Interface customized. 

Stone Coated Roof Tile Production Line

Stone Coated Roof Tile Production Line,Stone Metal Roof Tiles Production Line,Stone Steel Roof Tiles Production Line,Steel Colorful Stone Coated Production Line

YingYee Machinery and Technology Service Co.,Ltd , https://www.yingyee.cn