Under the process of making asphalt asphalt truck transport in after if the brakes, but the signs are they that vehicle brakes are not cases but continues to travel fast, if there was such a situation, whether the driver will find it unusual thriller ? What happened to the brake failure?
1. The vast majority of asphalt transport vehicles have experienced brake failure or relatively slow brake response. This is due to the misconduct of the driver when driving the vehicle. Or because the asphalt transport vehicle is doing maintenance, because of improper maintenance, it will damage the Brake System of the asphalt transport vehicle. This will cause the situation that the vehicle has brake failure during transport driving. .
2, and in the relatively hot summer weather, if there is a brake failure occurred in the majority of the small displacement of the asphalt transporter appears. Because the engine power of the small displacement asphalt transport vehicle model is insufficient. The temperatures and relatively high, asphalt truck after the air conditioning turned on when the driver presses the brake, the vehicle's engine is no way to turn repeatedly to take into account the resistance to the brake pump, and this will cause the vehicle The brake resistance pump has failed.
3. However, when some drivers are driving asphalt transport vehicles, they often feel that the vehicle's brakes suddenly become heavy and not very good. Then what is the result of what kind of situation? Especially in such a hot summer, it is even more fiery. Actually, the main reason for this is the air-conditioning problem of asphalt transport vehicles. As summer temperatures increase, the air is opened throughout the process when drivers use vehicles, especially those with small displacements. Transporter, when the vehicle's air is always on, it will cause the engine to have a heavy load, so it will cause the vehicle to feel heavy on the brakes.
4. The brake pump seal of the asphalt transport vehicle is not tight enough, the vacuum resistance pump has failed, the brake oil is mixed and used, the gas resistance occurs after the heat is applied, the brake oil is reduced in oil impurities, the gas tank and the pipeline interface. The occurrence of leaks, brake master cylinders, and the occurrence of oil leaks in the sub-pumps will invalidate the brakes.
5, Asphalt transporter has a serious overload, because the effect of acceleration in the case of gravity, will increase the inertia of a vehicle's movement, which will cause the brake failure.
Clutch Bearing Fork,Clutch Fork Bearing,Hydraulic Clutch Bearing,Hydraulic Clutch Release Bearing
Wenzhou Nade Automotive Electronics Co., Ltd , https://www.nadepumps.com