3003 aluminum pipe
3003 aluminum pipes are mainly used to require high plasticity and good welding properties. Low load parts working in liquid or gas media, such as gasoline or lubricating pipelines, various liquid containers, and other small load parts made of deep -pulpated loading parts with deep -pulpated loading parts. , Wiring for rivets.
State: O, H112, H14, H24
Characteristic
3003 is Al-Mn alloy, which is the most widely used rust-proof aluminum. This alloy is not high (slightly higher than the industrial pure aluminum), and it cannot be treated with heat treatment. Therefore, it is used to improve its mechanical performance: There is a high plasticity in the annealing state. When the semi -cold sclerosis is still good, the plasticity is low when the cold is harden, good corrosion resistance, good welding, poor cutting performance
Use
3003 Aluminum Tube formability, dissolution, and corrosion resistance are good. It requires good forming performance, high corrosion -weldable parts, or requires both these properties and requires high -strength work than 1xxx. Storage device, tanks and tanks of liquid products, various pressure vessels and pipelines, heat sinks, cosmetics, photocopic drums, and ship materials for various pressure vessels and pipelines.
Chemical composition
|
Chemical formation score (mass score) (%) |
||||||||||
|
Si |
Fe |
Cu |
    Si+Fe |
     Mn |
     Pb |
Zn |
  Bi |
Other |
Al |
|
|
Single |
All |
|||||||||
|
0.60 |
0.70 |
0.05～0.2 |
 ～  |
1.0～1.5 |
 ～  |
0.10 |
 ～  |
0.05 |
0.15 |
other |
Â
Mechanical performance
|
Mechanical energy, material rationality (reference value) |
|||||||
|
Tensile strength σb（MPa） |
Yield Strength σ0.2（MPa） |
Extension δ5 (%) |
Brinell hardness HBW |
Density Ï（g·cm-3） |
Lineflation coefficient c[J/(kg·K)] |
Thermal conductivity λ[W/(m·K)] |
Heating Ñ[J/(kg·K)] |
|
   142-178 |
≥115 |
 |
 |
    2.75 |
 |  | |
Car Using Condensator And Evaporator
Application:
Refrigerator, freezer and other refrigeration equipment evaporator
Raw materials:
1) Aluminum tube: ¢8.0×0.7~1mm
2) Aluminum foil: sheet thickness T = 0.15 ~ 0.25mm
3) Side panel: aluminum plate T=0.8~1.5mm
Main Process:
| 1.Bending | 2.Stamping | 3.Expansion |
| 4.Degreasing | 5.Welding Assembly | 6.Leak Detection |
| 7.Drying | 8.Inspection | 9.Packing |
Technical Specifications:
1) oblique insertion type: fin specification 50×19.05×N; 60×19.05×N (N≥4)
2) Expansion type: fin size 60×28; 52×28
3) Compression type: fin size 50.8×203.2
Can be customized according to customer drawings or sample requirements
Xinxiang Yukun Refrigeration Technology Co. is a production and sales of refrigeration two apparatus parts and sheet metal products, mainly engaged in condenser, evaporator, heat exchanger, reservoir, filter drier, Fin Evaporator (condenser), Stamping Parts, sheet metal parts, aluminum tubes for refrigeration, etc.
Our evaporator and condensers are being supplied to Norway, Russia, Ukraine, Korea, Japan, Pakistan, India, Malaysia, Indonesia, Sri Lanka, Bangladesh, Saudi arabia, Lebanon, Syria, Turkey, Italy, Britain, Spain, Portugal, USA, Chile, Peru, Argentina, Brazil, Russia, Ukraine....for many years.
If you have any interest, pls feel free to contact with us at any time. We can supply copper evaporator and copper condensers according to your drawings or samples.
car,condensator,evaporator
Xinxiang Yukun Refrigeration Technology Co.Ltd , https://www.yukunevaporator.com