3000mm Automatic Chain Link Fence Making Machine (Manufacturer)

Model NO.: Jiake
Low-Voltage: Schneider
Motor: Chiese Top Servo Motor
Technique: Single Model and Double Helix
Programmable Logic Controller: Japan Mitsubishi PLC
Alarm: Alarm Device
Electic&Machinery: Taiwan Teco Electric
Unit Weight: 4200kg
Material: Galvanized Iron Wire
Application: Construction Wire Mesh
Surface Treatment: Galvanized
Trademark: JIAKE
Transport Package: Plastic Films/Woden Box
Specification: CE
Origin: Hebei, China
HS Code: 8463300000
I. Description
Illustration of working principle:
Chain link machine for manufacturing chain link fences of different sizes. The wire is taken in from the payoff stand and passed through the dies where the diamond size takes place. Different gap sized. After passing from the die of diamond pattern wire is automatically thrown on the winding shaft in the stitching process. Once the stitching is complete the woven is manually glided down to the next stitch to take place.
Application: Chain Link Fence is extensively used as fences for playground and gardens, highway, railway, airport, port, residence, etc.
3000mm Automatic Chain Link Fence Making Machine (Manufacturer)

3000mm Automatic Chain Link Fence Making Machine (Manufacturer)
Advantages:
1. It adopts the technique of single model and double helix and it can improve the work efficiency greatly.
2. Japan Mitsubishi PLC (Programmable Logic Controller)
3. French Schneider inverter
4. Chinese top servo motor (make the production more precise).
5. There are two ways for the side of chain link fence, one is twisted the other is with burr in edge.
6. There is a controller cabinet hanging and it can set the length of the wire mesh, once the weaving finish, it will stop.
7. An alarm device has been installed, once the production is completed, the alarm will ring. There is a limit switch and it can stop immediately.
8.Speed of die:500r/min
3000mm Automatic Chain Link Fence Making Machine (Manufacturer)3000mm Automatic Chain Link Fence Making Machine (Manufacturer)
II.Technical Parameter
Model LW30/80-3/4
Width scope of weaving ≤3m/4m
Mesh scope of weaving 25mm-80mm
Wire scope 3mm
Outside size Main machine 6700*1430*1800
Net reel 5100*1700*1250
Motor Servo Motor 5.5kw
Cutter 1.5kw
Rolling 0.75kw
Raw Material Galvanized wire;PVC bag steel wire
III.Diameter of Wire Mesh opening size
Diameter of Wire Mesh opening size
1.8mm 30-40mm
2.0mm 30-50mm
2.2mm 30-60mm
2.5mm 40-70mm
2.8mm 50-80mm
3.0mm 60-80mm
3.2mm 70-80mm
3.5mm 80-100mm
4.0mm 100mm*100mm
IV.Commercial terms
1. FOB CIF CFR all available
2. Payment: 30% T/T in advance, the balance 70% by T/T after check the machine at seller's factory.
3. Minimum order quantity: 1 set
4. Certification: ISO 9001 Certificate
5. Delivery time: 30 days from received your payment in advance.
6. Country of origin: China
7. Our guarantee time: 12 months after the equipment is accepted by the buyer, however, the guarantee period is no longer than 18 months after equipment's departure from Xingang port, China.
8. Installation: we could arrange our engineer install the machine in our factory.
3000mm Automatic Chain Link Fence Making Machine (Manufacturer)
V.Contact Information
3000mm Automatic Chain Link Fence Making Machine (Manufacturer)
 
 
 
 

Flange Bolts&Nuts

Nuts,Bolts,Screws Co., Ltd. , http://www.nssteelfasteners.com