The heavy oil exploitation in the Tahe Oilfield of the Northwest Branch has been dominated by cold mining. However, as the development time is extended and the formation energy is reduced, some of the heavy oil wells are stopped and the oil is thickened. Last year, Tahe Oil Production Plant began to introduce a new type of immersion thick pump, in order to continue to develop heavy oil and control water production.
Shortly thereafter, the plant conducted a pilot test of the immersion thick pump in the TK488 well. Because the pump mainly uses the inertial force of the plunger to enter the oil, commonly known as oil extraction, the oil inlet passage is large, the crude oil does not flow relative to the wellbore, the resistance of the heavy oil into the pump is small, and the effect of thickening and controlling water is obvious. At present, the pump has been operating normally, and the TK488 well has produced more than 1,500 tons of crude oil.
At present, the plant is deploying follow-up tests and conducting further follow-up evaluations, and plans to gradually promote such immersed thick pumps in the heavy oil area of ​​Tahe Oilfield.
The category of armature assembly used in LPG / CNG injector rail.
1. The tube OD sizes range from 5mm to 23mm, big than 23mm is also available
2. The valve seat orifice sizes ranges from 0.6mm to 4.0mm and higher for special applications.
3. Choose the suitable material for the application as Brando offers plunger tubes in brass and stainless steel.
4. Spring: Rustproof SUS304 stainless steel, with good performance of restore.
5. Seals: Options of NBR, HNBR, FKM, EPDM, PTFE, food grade materials, welcome your other requirements.
6. Shading ring: Cooper and silver material available.
7. Washer and retaining nut provided if has demands.
Injector Rail Armature Assembly
Injector Rail Armature Assembly,armature assembly for injector rail,injector rail repair kit,injector rail rebuild kit
NINGBO BRANDO HARDWARE CO.,LTD , https://www.brandopneumatic.com