Turbine flowmeters are manufactured using advanced foreign technology and are one of the most ideal metering fluids. It has the characteristics of simple structure, high measurement accuracy, long service life, simple operation and easy maintenance. The product is widely used in metallurgical, chemical, petroleum, urban construction, environmental protection, food and other fields, high-precision measurement of water, tap water, diesel, gasoline and lower.
Turbine flowmeters in Europe and the United States are the second statutory natural gas flowmeters after orifice flowmeters, and have been developed into multi-species, full-range, multi-scale, and mass-produced natural gas flowmeters. The standard specification is also very complete, but there are also deficiencies: the requirement for measuring the cleanliness of media is high, and the service life is limited. However, according to the foreign use department, it was said that 240 flow meters have been used for 8 to 15 years to perform cycle verification, and it has been found that the accuracy of the meter is still within the specified range. In addition, a highly efficient rectifying rectifier and a turbine flow sensor are coupled to form an integrated gas turbine flowmeter. In the condition that the upstream baffle is an elbow or a half-opening globe valve, only 2D straight pipe length is required. As for the narrow installation space in the city, it is a prominent feature.
Turbine flowmeters in Europe and the United States are the second statutory natural gas flowmeters after orifice flowmeters, and have been developed into multi-species, full-range, multi-scale, and mass-produced natural gas flowmeters. The standard specification is also very complete, but there are also deficiencies: the requirement for measuring the cleanliness of media is high, and the service life is limited. However, according to the foreign use department, it was said that 240 flow meters have been used for 8 to 15 years to perform cycle verification, and it has been found that the accuracy of the meter is still within the specified range. In addition, a highly efficient rectifying rectifier and a turbine flow sensor are coupled to form an integrated gas turbine flowmeter. In the condition that the upstream baffle is an elbow or a half-opening globe valve, only 2D straight pipe length is required. As for the narrow installation space in the city, it is a prominent feature.
Dongfeng Truck Engine Parts,Truck Master Pin,Conrod Bearing,Cylinder Liner
Dongfeng Truck Engine Parts Co., Ltd. , http://www.ochoasautoparts.com