- Model NO.: UV260D
- Trademark: Torch
- Origin: Beijing. China
- Dimension: 510*410*150mm
- Specification: CE
UV260D adopts the high-tech UV exposure machine from Germany. It can achieve high accuracy exposure of PCB, it can also accomplish the accurate welding tray of the PCB and the clear pattern of the lead wire.
Introduction:
KVB-30A: Adjust the time and select buttons with figures or tools.
KVB-30D: Press PRESET SECOND to set + or - the opening or closing.
Exposure time: 60-90 seconds for a photo script and a line script, the manuscript is70-120 seconds for the manuscript. Semitransparent scripts need 10-30 seconds more (an electron sensitive board is better), other underpans that are low-sensitive increase the exposure time
1.5-3 times.
2. To open the vacuum clamp, please use the vacuum spanner outward and upward.
3. Put the sensitive board on the glass of the vacuum clamp, and then click for the aspiratory mouth, keep a distance of 1-3 cm. With JE close in scripts and then adhesive tape paste margin, put the sensitive board into scripts.
4. Close the vacuum clamp and confirm it has been locked.
5. Open the vacuum pump power, after drawing out vacuum, close the cover, open the light up or down or up and down open at one time.
KVB-30A Red LED indicates the exposure process, when all red LED are off and yellow LED are on, it indicates the finishing exposure's process.
KVB-30D The number of LED indicates exposure's seconds. When the exposure is finished, the calculagraph stops and sounds tip for 2-3 seconds.
KVB-30D When you adjust preset time in the exposure process; It is easy to break the exposure off, so please press intermit time to provide the exposure's reference.
Close the vacuum PUMP power, open the cover, wait for several time and then make move the vacuum clamp. Afterwards, it is easy to open the cover and take the sensitive board.
If you wish to continue the exposure, please press RE-EXPROSE to start again the process. If you wish to stop the exposure, please turn off all switches on the panel and then close the cover.
Single Layer Anti-Reflective Coatings,Anti-Reflective Coatings,Optical Lens
Optical Prisms,Acrylic Co., Ltd. , http://www.nsopticallens.com