The three conditions most likely to occur in cars

The three conditions most likely to occur in cars

When car owners usually maintain their cars, they pay special attention to the car's surfaces and interiors. After all, they are places they often see. However, some key parts of cars need to be changed once or not often replaced. These parts that are not usually noticed will be ignored. In fact, these parts are places that car owners should pay attention to.

Periodically check the condition of the brake fluid level: if the brake fluid is insufficient, air will enter and the brake will become insensitive. Therefore, it is advisable to regularly check the height of the brake fluid on a monthly basis and pay attention to whether there is a significant drop in the fluid level of the brake fluid and whether the quality deteriorates. If so, it should be added or replaced in time.

Solution: The brake fluid storage tank is made of translucent resin. If the tank is dirty, it can be wiped with a cloth and a simple visual inspection can be performed. The brake fluid should reach the base line of the storage tank. If the brake fluid is greatly reduced from the previous inspection, there is a high probability of failure and leakage may occur. At the same time, the manual transmission is equipped with a clutch, which also requires attention to its fluid volume. If the fluid volume is reduced and air enters, it cannot be effectively braked.

Check the condition of the brake fluid every 10,000 km: The brake shoe and the brake disc have a service life, and they must be replaced when they are worn to a certain degree. Generally speaking, in city driving, the service life of the brake disc is about 50,000 kilometers, and the life of the brake shoe is about 30,000 kilometers. However, the specific situation depends on the operation of the owner.

Solution: The brake shoe is best checked every 10,000 kilometers. The brake fluid is generally replaced every 50,000 kilometers. If the vehicle is driven in a humid area for a long period of time, the oil change cycle should be appropriately shortened.

Abnormal situation carefully check the appearance of the situation: when the vehicle is dragging the bottom, it is very likely to run into the brake fluid pipe; when the brake is applied, the car will obviously go to the left or right; the brake pedal will be stepped to the end, but the braking effect is not obvious. And there is no improvement in the effect of continuously pressing the brake pedal.

Solution: After stepping on the bottom of the vehicle, step on a few feet to brake. Get off the vehicle and check if there is any deformation or leakage of the tubing. The car's deviation is due to the non-synchronous front brake, and it is easy to accidentally grab the left due to the brake. When the vehicle is traveling at a high speed, it is necessary to immediately perform brake adjustment at the repair shop. The weak braking effect may be due to the presence of gas in the brake system that needs to be repaired by a professional repair station; For problems such as being too long, we must also pay attention to the maintenance point for inspection.

In addition, after long-distance driving, the brake system should be carefully checked to check the brake pipe for bumps, damage, and leakage, because the splashed stones hit the brake fluid pipe of the chassis at high speed. It can cause brake fluid to leak or brake to malfunction. If the brake fluid tube is flattened, it can also cause single wheel brake to malfunction.


technical parameters
Hydraulic system working pressure 20T
Bag piece size 700mm*1000mm*800mm
Paper bag weight 200KG/ Per paperbag
The paper separator 2000mm-4500mm
Machinery size 1000mmx1500mmx2800mm
Weight 1000kg

Vertical Waster Paper Baler Machine

Baling Press Machine,Vertical Waster Paper Baler Machine,Vertical Hydraulic Waste Paper Baler Machine,Waster Paper Baler Packing Machine

JIALONG PACKAGING MACHINERY CO.,LTD , http://www.jlcartonmachine.com